Calling Up The Parameters Of The Patient Last Ventilated - Weinmann MEDUMAT Standard2 Instructions For Use Manual

4 Preparation and operation
Result
4.7.2 Calling up the parameters of the patient last
Requirement
68 EN MEDUMAT Standard
Depending on the preset in the operator menu, the device
switches to one of the following modes with the ventilation
parameters preset for the patient group
settings for emergency modes and ventilation modes",
page 234) and shows a pressure gauge view:
• IPPV
• BiLevel + ASB (only if the BiLevel + ASB option is activated)
An emergency mode for a particular patient group is activated.
ventilated
The device is switched off.
1. Switch on the device.
After the self-test, the device displays the start menu:
If the device was switched off for < 30 seconds (e.g., for a
battery change), a countdown in the Previous patient field
counts down 20 seconds.
If the device was switched off for > 30 seconds, the
countdown for the last patient is deactivated.
2
(see "14.1.9 Factory