Connecting Components; Changing The Battery; Inserting The Hygiene Filter - Weinmann MEDUMAT Standard2 Instructions For Use Manual

4.3.5 Changing the battery

Requirement The replacement battery is fully charged.
1. Switch off the device
2. Take battery out of the battery compartment.
3. Slide the replacement battery into the battery compartment
4. Switch on the device
Result The device is operated with a fully charged battery.

4.4 Connecting components

4.4.1 Inserting the hygiene filter

1. Check the hygiene filter for external damage. If necessary:
2. With the filter side facing forwards, slide the hygiene filter into
page 66).
or
Connect the device to the line power.
until it audibly clicks into place.
page 65). The symbol
Replace the hygiene filter.
the device's filter compartment until the hygiene filter is flush
with the device.
4 Preparation and operation
(see "4.6 Switching the device off",
(see "4.5 Switching the device on",
appears on the display.
MEDUMAT Standard
2
EN 51