Download Print this page
Weinmann SOMNOvent CR Short Instructions For Use

Weinmann SOMNOvent CR Short Instructions For Use

Cs-therapy unit with autotrilevel principle (devices as of serial number 10.000 or firmware version 5.0)
Hide thumbs Also See for SOMNOvent CR:

Advertisement

Quick Links

SOMNOvent CR
CS-Therapy unit with autoTriLevel principle
SOMNOvent CR
SOMNOvent CR with SOMNOclick 300
Short instructions for use
with devices as of serial number 10.000
or firmware version 5.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the SOMNOvent CR and is the answer not in the manual?

Questions and answers

Summary of Contents for Weinmann SOMNOvent CR

  • Page 1 SOMNOvent CR CS-Therapy unit with autoTriLevel principle SOMNOvent CR SOMNOvent CR with SOMNOclick 300 Short instructions for use with devices as of serial number 10.000 or firmware version 5.0...
  • Page 3: Switching The Unit On/Off

    These short instructions summarize the most important points for the use of SOMNOvent CR. More detailed information can be found in the complete operating instructions WM 66321. In particular, please note the convenient operation using the patients' menu. Switching the unit on/off...
  • Page 4 Operation with humidifier Status: Device switched off Open the filling plug; fill with water up to the mark " "; close the filling plug Detach the breathing tube Push on the humidifier Push on the breathing tube Switch on device...
  • Page 5 Display: Therapy Pressure Switch on humidifier Display: Humidifier in operation, humidifier level set Adjusting the humidifier level Status: Device switched on Hold pressed down for 3 seconds until the humidifier level flashes in the display Display: Humidifier level flashes Set level: + or - Mask test Status: Device switched off Press Menu key briefly 3x.
  • Page 6: Soft Start

    Display: pressure for mask test flashes Change by means of + or - Leakage indicator Status: Device switched on Press Menu key briefly 1x. Display: No/small leak. Display: Medium leak. Fit the mask. Display: Medium leak. Fit the mask. Softstart Status: Device switched on Switch the Softstart on or off Display: Softstart activated...
  • Page 7 Adjusting the Softstart time Status: Device switched on Hold pressed down for 3 seconds until the display flashes Display: Softstart time flashes Set time: + or - Automatic switching of the device Auto 0FF = Automatic deactivated Auto on = Automatic activated Status: Device switched off Press the menu button 2x briefly...
  • Page 8 Reading out the therapy data Overall length of therapy Switch on device Length of day's therapy Switch off device Operating hours Switch off the device, press the button for a long period Drying the tube system Status: Device switched off Thoroughly shake out the still-damp breathing tube Remove the humidifier if...
  • Page 9 Connect the breathing tube alternatively, if there is moisture in the pressure measuring tube, plug the red drying adapter between the device outlet port and the breathing tube. Start the drying process: press at the same time briefly. Interrupt the drying process Display Filter change necessary Servicing necessary...
  • Page 12 Weinmann Geräte für Medizin GmbH+Co.KG P.O.Box 540268 D-22502 Hamburg Kronsaalsweg 40 D-22525 Hamburg T: +49-(0)40-5 47 02-0 F: +49-(0)40-5 47 02-461 E: info@weinmann.de www.weinmann.de Center for Production, Logistics, Service Weinmann Geräte für Medizin GmbH+Co.KG Siebenstücken 14 D-24558 Henstedt-Ulzburg...

This manual is also suitable for:

Somnovent cr with somnoclick 300