Technical Data For Power Supply - Weinmann MEDUMAT Standard2 Instructions For Use Manual

Specification
Transport/Storage:
Temperature range
Humidity
Service life
Charging intervals

14.1.3 Technical data for power supply

Specification
Power supply operation 50 W (WM 28305):
Temperature range
Humidity
Air pressure
Height above sea level
Power supply operation 100 W (WM 28937):
Temperature range
Humidity
Air pressure
Height above sea level
Input voltage (external power supply)
Rated voltage output
Disconnection from line power
* One charging cycle corresponds to one instance of the battery
being charged by 100%, regardless of the current battery status.
Example: If you charge the battery to 100% from a status of 50%
twice, the device counts this as one charging cycle.
Battery
-40°C to +70°C (max. one week at more than
+60°C)
0% RH to 95% RH without condensation
At least 300 charging cycles*
When stored in the device without a power
connection: Every 3 months
When not stored in the device: Every 5 months
Power supply
-18°C to +50°C
0% RH to 95% RH without condensation
540 hPa to 1100 hPa
-500 m to 5000 m
0°C to +40°C
5% RH to 95% RH without condensation
700 hPa to 1100 hPa
-500 m to 3000 m
100 V-240 V~/50 Hz-60 Hz
15 V
Pulling out the power plug disconnects the device
from line power on all poles.
MEDUMAT Standard
14 Appendix
2
EN 219