3. Perform inhalation
Inhalation option)",
Result
Inhalation via the inhalation adapter is prepared.
4.4.8 Connecting the etCO
1. Position the etCO
2. If necessary: Fix the tubes of the etCO
face using adhesive plasters.
3. Connect the inhalation inlet of the etCO
the inhalation outlet of the pressure reducer.
4. Connect the CO
water filter to the measuring hose system connector.
As an alternative to the etCO
connect the CO
connector and couple with the Luer lock connector of a breathing
system filter or a resuscitator.
Result
CO
monitoring is prepared via an external interface.
2
(see "4.7.7 Performing inhalation (only with
page 76).
/O
nasal cannula
2
2
/O
nasal cannula.
2
2
inlet of the etCO
2
/O
nasal cannula, you can also
2
2
measuring hose to the measuring hose system
2
MEDUMAT Standard
4 Preparation and operation
/O
nasal cannula to the
2
2
/O
nasal cannula to
2
2
/O
nasal cannula with
2
2
2
EN
63