Table of Contents
Advertisement
3. Repeat steps 1–2 to remove the bracket from the other opposite rack column.
Retain the shipping brackets and screws in case there is a need to ship or transport the rack-installed
server at a later date.
Configuring the server
When the server is powered on, the POST screen is displayed. Use the following options to configure the
server:
•
System utilities (F9)
Use this option to configure UEFI, RBSU, or other boot settings.
•
Intelligent Provisioning (F10)
Use this option to configure drives, access Smart Storage Administrator, or begin installing or deploying an
operating system.
•
Boot order (F11)
Use this option to select a boot device.
•
Network boot (F12)
Use this option to PXE boot the server from the network.
Installing or deploying an operating system
Before installing an operating system, observe the following:
•
Be sure to read the HPE UEFI requirements for ProLiant servers on the Hewlett Packard Enterprise
website. If UEFI requirements are not met, you might experience boot failures or other errors when
installing the operating system.
•
Update firmware before using the server for the first time, unless software or components require an older
version. For more information, see "Keeping the system current on page 167."
•
For the latest information on supported operating systems, see the Hewlett Packard Enterprise website.
•
The server does not ship with OS media. All system software and firmware is preloaded on the server.
Registering the server
To experience quicker service and more efficient support, register the server at the My License Portal website:
36
Configuring the server
Advertisement
Table of Contents
