Table of Contents
Advertisement
SFF SmartDrive components
Item
1
2
3
4
5
1
The blue locate LED is behind the release lever and is visible when illuminated.
Enabling embedded chipset SATA controller support
Use the Embedded SATA Configuration option to enable embedded chipset SATA (Serial Advanced
Technology Attachment) controller support. You can select AHCI or HPE Smart Array S100i SR Gen10 SW
RAID support. Make sure that you are using the correct operating system drivers for your selected option.
20
SFF SmartDrive components
Description
1
Locate LED
Activity ring LED
Drive status LED
Do not remove LED
Do not remove button
Status
Solid blue = The drive is being identified by a host
application.
Flashing blue = The drive carrier firmware is being
updated or requires an update.
Rotating green = Drive activity
Off = No drive activity
Solid green = The drive is a member of one or more
logical drives.
Flashing green = The drive is rebuilding or
performing a RAID migration, stripe size migration,
capacity expansion, or logical drive extension, or is
erasing.
Flashing amber/green = The drive is a member of
one or more logical drives and predicts the drive will
fail.
Flashing amber = The drive is not configured and
predicts the drive will fail.
Solid amber = The drive has failed.
Off = The drive is not configured by a RAID controller.
Solid white = Do not remove the drive. Removing the
drive causes one or more of the logical drives to fail.
Off = The drive can be removed. Removing the drive
does not cause a logical drive to fail.
Press to open the release lever.
Advertisement
Table of Contents
