Table of Contents
Advertisement
14. Install the expansion board.
Single-width standup expansion board
Double-width standup expansion board
15. Make sure that the board is firmly seated in the slot.
16. Observe the guidelines for managing cables.
17. Connect all necessary internal cabling to the expansion board.
For more information on these cabling requirements, see the documentation that ships with the option.
18. Install the PCI blank retainer on page 58.
19. If the fan cage was removed, do the following:
a. Make sure that all the system cables that are routed through the front cable channel are properly
secured in the metal cable tabs. This is done to prevent system damage due to cables being
inadvertently caught under the fan cage.
b. Install the fan cage on page 55
20. Install the air baffle on page 51.
21. Install the access panel on page 49.
126
Hardware options installation
Advertisement
Table of Contents
