13. Install the fan cage:
a. Align the fan cage with its chassis brackets.
b. Close the latches until they click into place.
14. Install the access panel on page 49.
15. Do one of the following:
•
Server in tower mode: Position the tower server for operation on page 42.
•
Server in rack mode: Slide the server into the rack on page 47.
16. Connect all peripheral cables to the server.
17. Connect each power cord to the server.
18. Connect each power cord to the power source.
19. Power up the server on page 38.
20. Install the front bezel on page 40.
The installation is complete.
110
Hardware options installation