Table of Contents
Advertisement
Item
Description
1
Locate LED
2
Activity ring LED
3
Drive status LED
4
Do Not Remove LED
5
Power LED
6
Power button
7
Do not remove button
Drive bay numbering
Drive bay numbering depends on how the drive backplane is connected. In this server, the backplane can be
connected to the:
•
Embedded Smart Array controller through the onboard SATA ports
•
Smart Array type-a modular (AROC) and type-p standup plug-in storage controllers
•
SAS expander card
When the backplane is connected to a storage controller, the drive bay numbering for each drive box starts at
1.
22
Drive bay numbering
Status
Solid blue = The drive is being identified by a host application.
Flashing blue = The drive carrier firmware is being updated or
requires an update.
Rotating green = Drive activity
Off = No drive activity
Solid green = The drive is a member of one or more logical drives.
Flashing green = The drive is rebuilding or performing a RAID
migration, stripe size migration, capacity expansion, or logical drive
extension, or is erasing.
Flashing amber/green = The drive is a member of one or more
logical drives and predicts the drive will fail.
Flashing amber = The drive is not configured and predicts the drive
will fail.
Solid amber = The drive has failed.
Off = The drive is not configured by a RAID controller.
Solid white = Do not remove the drive. Drive must be ejected from
the PCIe bus prior to removal.
Flashing white = Ejection request pending
Off = Drive has been ejected
Solid green = Do not remove the drive. Drive must be ejected from
the PCIe bus prior to removal.
Flashing green = Ejection request pending
Off = Drive has been ejected
Press to request PCIe ejection. Removal request can be denied by
the:
•
RAID controller (one or more of the logical drives could fail)
•
Operating system
Press to open the release lever.
Advertisement
Table of Contents
