Hpe 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply - HPE ProLiant ML350 Gen10 User Manual

CAUTION:
This equipment is designed to permit the connection of the earthed conductor of the DC supply circuit to
the earthing conductor at the equipment.
If this connection is made, all of the following must be met:
• This equipment must be connected directly to the DC supply system earthing electrode conductor or
to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing
electrode conductor is connected.
• This equipment must be located in the same immediate area (such as adjacent cabinets) as any
other equipment that has a connection between the earthed conductor of the same DC supply circuit
and the earthing conductor, and also the point of earthing of the DC system. The DC system must be
earthed elsewhere.
• The DC supply source is to be located within the same premises as the equipment.
• Switching or disconnecting devices must not be in the earthed circuit conductor between the DC
source and the point of connection of the earthing electrode conductor.

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply

Specification
Input requirements
Rated input voltage
Rated input frequency
Rated input current
Maximum rated input power
BTUs per hour
Power supply output
Rated steady-state power
Maximum peak power
Value
200 VAC to 240 VAC
240 VDC for China only
50 Hz to 60 Hz
8.7 A at 200 VAC
7.2 A at 240 VAC
1,734 W at 200 VAC
1,725 W at 240 VAC
5,918 at 200 VAC
5,884 at 240 VAC
1,600 W at 200 VAC to 240 VAC input
1,600 W at 240 VDC input
2,200 W for 1 ms (turbo mode) at 200 VAC to 240
VAC input
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply 179