Configuring The Server For Nvdimms - HPE ProLiant DL360 Maintenance And Service Manual

Configuring the server Configuring the server for NVDIMMs
After installing NVDIMMs, configure the server for NVDIMMs. For information on configuring settings for NVDIMMs, see the HPE 16GB
NVDIMM User Guide on the Hewlett Packard Enterprise website ( https://www.hpe.com/info/nvdimm-docs
The server can be configured for NVDIMMs using either of the following:
UEFI System Utilities—Use System Utilities through the Remote Console to configure the server for NVDIMM memory options by
pressing the F9 key during POST. For more information about UEFI System Utilities, see the Hewlett Packard Enterprise website
(https://www.hpe.com/info/uefi/docs https://www.hpe.com/info/uefi/docs).
iLO RESTful API for HPE iLO 5—For more information about configuring the system for NVDIMMs, see
https://hewlettpackard.github.io/ilo-rest-api-docs/ilo5/. https://hewlettpackard.github.io/ilo-rest-api-docs/ilo5/
for NVDIMMs
https://www.hpe.com/info/nvdimm-docs).

Configuring the server for NVDIMMs

157