Table of Contents
Advertisement
7.
Slide the server tray out of the rack:
a. Loosen the server tray thumbscrews.
b. Grasp the tray notch to slide the server out of the rack.
8.
If you are installing the server in a square-hole rack, install the cage nuts. When installed, the flanges on
the cage nut should face the outside of the rack:
a. Hook the bottom flange of the cage nut in the rack hole.
b. Insert the tip of the insertion tool through the hole and hook the top flange of the cage nut.
c. Use the insertion tool to pull the cage nut through the hole until the top flange snaps into position.
Operations
61
Advertisement
Table of Contents
