Retain the blank for future use.
10. Install the drive cage.
11. Observe the guidelines for managing cables.
12. Connect the drive cables:
•
Storage controller cable
•
Drive power cable
13. If the fan cage was removed, do the following:
a. Make sure that all the system cables that are routed through the front cable channel are properly
secured in the metal cable tabs. This is done to prevent system damage due to cables being
inadvertently caught under the fan cage.
b. Install the fan cage on page 55
14. Install the air baffle on page 51.
15. Install the access panel on page 49.
16. Do one of the following:
Hardware options installation
95