Table of Contents
Advertisement
9.
If it is not already installed, install the Smart Storage battery.
10. Install the access panel.
11. Slide or install the server into the rack.
12. Connect each power cord to the server.
13. Power up the server.
14. If required, sanitize the NVDIMM-Ns. For more information, see NVDIMM sanitization on page 83.
Configuring the server for NVDIMMs
After installing NVDIMMs, configure the server for NVDIMMs. For information on configuring settings for
NVDIMMs, see the HPE 16GB NVDIMM User Guide on the Hewlett Packard Enterprise website (http://
www.hpe.com/info/nvdimm-docs).
The server can be configured for NVDIMMs using either of the following:
•
UEFI System Utilities—Use System Utilities through the Remote Console to configure the server for
NVDIMM memory options by pressing the F9 key during POST. For more information about UEFI System
Utilities, see the Hewlett Packard Enterprise website (http://www.hpe.com/info/uefi/docs).
•
iLO RESTful API for HPE iLO 5—For more information about configuring the system for NVDIMMs, see
https://hewlettpackard.github.io/ilo-rest-api-docs/ilo5/.
NVDIMM sanitization
Media sanitization is defined by NIST SP800-88 Guidelines for Media Sanitization (Rev 1, Dec 2014) as "a
general term referring to the actions taken to render data written on media unrecoverable by both ordinary
and extraordinary means."
The specification defines the following levels:
Hardware options installation
83
Advertisement
Table of Contents
