Enterasys SecureStack B3 Configuration Manual page 315

Table 9-1 Valid IP DSCP Numeric and Keyword Values (Continued)
Code Point Map
b'010xx0
b'011xx0
b'100xx0
b'101110
Defaults
None.
Mode
Switch command, read‐write.
Usage
Any policy that is applied must be composed of rules that come from only one of the following
four groups.
• Layer 3:
– Destination IP address (dstip)
– Destination Layer 4 port (dstl4port)
– IP Diffserv Code Point (ipdscp)
– IP precedence field (ipprecedence)
– IP type of service (TOS) field (iptos)
– IP protocol field (protocol)
– Source IP address (srcip)
– Source Layer 4 port (srcl4port)
• Layer 2:
– Destination MAC address (dstmac)
– Source MAC address (scrmac)
– VLAN ID (vlan)
• Layer 2 Layer 3 source:
– Source MAC address (scrmac)
– Source IP address (srcip)
– VLAN ID (vlan)
• Layer 2 Layer 3 destination:
– Destination MAC address (dstmac)
– Destination IP address (dstip)
– VLAN ID (vlan)
Numeric Value
18,20,22
26,28,30
34,36,38
46
Keyword (Usage)
af21, af22, af23 (Assured Forwarding)
af31, af32, af33 (Assured Forwarding)
af41, af42, af43 (Assured Forwarding)
ef (Expedited Forwarding)
SecureStack B3 Configuration Guide 9-7
set diffserv class match