Enterasys SecureStack B3 Configuration Manual page 499

This chapter describes the switch mode set of commands used to manage IPv6.
Purpose
To enable or disable the IPv6 management function, to configure and display the IPv6 host
address and IPv6 gateway for the switch, and to display IPv6 status information.
Commands
For information about...
show ipv6 status
set ipv6
set ipv6 address
show ipv6 address
clear ipv6 address
set ipv6 gateway
clear ipv6 gateway
show ipv6 neighbors
show ipv6 netstat
ping ipv6
traceroute ipv6
show ipv6 status
Use this command to display the status of the IPv6 management function.
Syntax
show ipv6 status
Parameters
None.
19
IPv6 Management
Refer to page...
SecureStack B3 Configuration Guide 19-1
19-1
19-2
19-2
19-3
19-4
19-5
19-6
19-6
19-7
19-8
19-8