Set Diffserv Policy Rename - Enterasys SecureStack B3 Configuration Manual

set diffserv policy rename

Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the policying action to drop for packets not conforming to the
Diffserv policy "admin," class "system."
B3(rw)->set diffserv policy police action nonconform drop admin system
set diffserv policy rename
Use this command to change the name of a Diffserv policy.
Syntax
set diffserv policy rename policyname newpolicyname
Parameters
policyname
newpolicyname
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to rename the "admin" Diffserv policy to "system":
B3(rw)->set diffserv policy rename admin system
9-14 Differentiated Services Configuration
Specifies the policy name previously set for this new Diffserv class.
Specifies a new policy name.