Table of Contents
Advertisement
set class create
Example
This example shows how to display a summary of Diffserv class information. In this case, there
are two classes configured, named "guest" and "admin":
B3(rw)->show diffserv class summary
Class Name
----------------- ------------ -------------------------------
guest
admin
set class create
Use this command to create a new Diffserv class.
Syntax
set diffserv class create {all classname}
Parameters
all
classname
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to create a Diffserv class called "admin":
B3(rw)->set diffserv class create all admin
set diffserv class delete
Use this command to delete a Diffserv class and remove any match assigned to the class.
Syntax
set diffserv class delete classname
Parameters
classname
Defaults
None.
9-4 Differentiated Services Configuration
Class Type
All
All
Specifies that all match conditions must be met before the associated policy
is executed.
Specifies a class name for this new Diffserv class.
Specifies the class name to be deleted.
Ref Class Name
Advertisement
Table of Contents
