Enterasys SecureStack B3 Configuration Manual page 367

Parameters
port‐string
Defaults
By default, transmit queues are defined as follows:
Queue
0
1
2
3
Mode
Switch command, read‐write.
Example
This example shows how to clear transmit queue values on
B3(su)->clear port txq ge.1.1
B3(su)->show port txq ge.1.1
Port Alg Q0
----- --- --- --- --- --- --- --- --- ---
ge.1.1 WRR 2
Note: Port traffic rate limiting is not supported on mixed stacks containing B3 or C3 devices.
Clears transmit queue values on specific port(s) back to their default
values. For a detailed description of possible port‐string values, refer to
"Port String Syntax Used in the CLI" on page 5‐1.
Only physical ports can be configured with this command. LAG ports
cannot be configured.
Mode Weight
WRR 1
WRR 2
WRR 3
WRR 4
Q1 Q2 Q3 Q4 Q5
10 15 20 24 29
Queue
4
5
6 Strict (not configurable)
7 Strict (not configurable)
.1.1:
ge
Q6 Q7
SP SP
SecureStack B3 Configuration Guide 11-9
clear port txq
Mode Weight
WRR 5
WRR 6
–
–