Table of Contents
Advertisement
set diffserv policy police action conform
Use this command to configure traffic policing actions for packets that conform to associated
Diffserv classifications.
Syntax
set diffserv policy police action conform {drop | send policyname classname} |
{markdscp | markprec policyname classname value}
Parameters
drop | send
policyname
classname
markdscp | markprec Specifies a policing action based on IP DHCP or precedence.
value
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the policing action to send for packets conforming to Diffserv
policy "admin," class "system."
B3(rw)->set diffserv policy police action conform send admin system
set diffserv policy police action nonconform
Use this command to configure traffic policing actions for packets that do not conform to
associated Diffserv classifications.
Syntax
set diffserv policy police action nonconform {drop | send policyname classname} |
{markdscp | markprec policyname classname value}
Parameters
drop | send
policyname
classname
markdscp | markprec Specifies a policing action based on IP DHCP or precedence.
value
Specifies whether the policing action for packets conforming to the
classification parameters will be to drop or send packets.
Specifies the policy name being configured.
Specifies a Diffserv class to associate to this policing action.
Specifies an IP DHCP or precedence value set with the set diffserv
policy mark command (page 9‐11).
Specifies whether the policing action for packets not conforming to the
classification parameters will be to drop or send packets.
Specifies the policy name being configured.
Specifies a Diffserv class to associate to this policing action.
Specifies an IP DHCP or precedence value set with the set diffserv
policy mark command (page 9‐11).
set diffserv policy police action conform
SecureStack B3 Configuration Guide 9-13
Advertisement
Table of Contents
