Example
This example shows how to enable PWA enhancedmode:
B3(su)->set pwa enhancedmode enable
Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.
Commands
For information about...
show ssh status
set ssh
set ssh hostkey
show ssh status
Use this command to display the current status of SSH on the switch.
Syntax
show ssh status
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SSH status on the switch:
B3(su)->show ssh status
SSH Server status: Disabled
set ssh
Use this command to enable, disable or reinitialize SSH server on the switch. By default, the SSH
server is disabled.
Configuring Secure Shell (SSH)
Refer to page...
20-69
20-69
20-70
SecureStack B3 Configuration Guide 20-69