Show Policy Rule Output Details - Enterasys SecureStack B3 Configuration Manual

usage‐list
display‐if‐used
Defaults
If verbose is not specified, summary information will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display policy classification information for Ethernet type 2 rules
B3(su)->show policy rule ether
|PID |Rule Type
|02 |Ether
|02 |Ether
|02 |Ether
|02 |Ether
This example shows how to display policy classification information for administrative rule 1
B3(su)->show policy rule admin-pid 1
|Admin|Rule Type
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
|admin|Port
Table 10‐2 provides an explanation of the command output.
Table 10-2 show policy rule Output Details
Output
PID
Rule Type
Rule Data
Mk
PortStr
RS
ST
VLAN
(Optional) If selected, each ruleʹs usage‐list shall be checked and shall
display only those ports which have applied this rule.
(Optional) Displays rule(s) only if they are applied to at least one port.
|Rule Data
|2048 (0x0800)
|2049 (0x0801)
|2989 (0x0bad)
|33079 (0x8137)
|Rule Data
|ge.1.1
|ge.1.2
|ge.1.3
|ge.1.4
|ge.1.5
|ge.1.6
|ge.1.7
|ge.1.8
|ge.1.9
|ge.1.10
|ge.1.11
|ge.1.12
What It Displays...
Profile index number. Assigned to this classification rule with the set policy profile
command ("set policy profile" on page 10-3).
Type of classification rule. Refer to
Rule data value. Refer to Table 10-3
Rule data mask. Refer to Table 10-3
value.
Ingress port(s) to which this rule applies.
Whether or not the status of this rule is active (A), not in service or not ready.
Whether or not this rule's storage type is non-volatile (NV) or volatile (V).
VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
|Mk|PortStr |RS|ST|VLAN|CoS |U|
|16|All | A|NV|fwrd|
|16|All | A|NV|drop|
|16|All | A|NV|drop|
|16|All | A|NV|drop|
|Mk|PortStr |RS|ST|dPID|aPID|U|
|16|ge.1.1 | A|NV|
|16|ge.1.2 | A|NV|
|16|ge.1.3 | A|NV|
|16|ge.1.4 | A|NV|
|16|ge.1.5 | A|NV|
|16|ge.1.6 | A|NV|
|16|ge.1.7 | A|NV|
|16|ge.1.8 | A|NV|
|16|ge.1.9 | A|NV|
|16|ge.1.10 | A|NV|
|16|ge.1.11 | A|NV|
|16|ge.1.12 | A|NV|
Table 10-3 for valid types.
for valid values for each classification type.
for valid values for each classification data
SecureStack B3 Configuration Guide 10-7
show policy rule
|?|
|?|
|?|
|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|
| 1|?|