Display Process Cpu - HP 6125XLG Command Reference Manual

Table 42 Command output
Field
JID
PID
%CPU
%MEM
STAT
PRI
TTY
HH:MM:SS
COMMAND

display process cpu

Use display process cpu to display CPU usage for all processes.
Syntax
display process cpu [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its ID. Without this option, the command displays
CPU usage for all processes on the master device.
Examples
# Display CPU usage for all processes.
<Sysname> display process cpu
CPU utilization in 5 secs: 16.8%; 1 min: 4.7%; 5 mins: 4.7%
JID
1
2
3
4
Description
Job ID of a process. It never changes.
Number of a process.
CPU usage in percentage (%).
Memory usage in percentage (%).
State of a process:
•
R—Running.
•
S—Sleeping.
•
T—Traced or stopped.
•
D—Uninterruptible sleep.
•
Z—Zombie.
Priority of a process for scheduling.
TTY used by a process.
Running time since the latest start.
Name and parameters of a process. If square brackets ([ ]) exist in a process name, the
process is a kernel thread.
5Sec 1Min
0.0% 0.0%
0.0% 0.0%
0.1% 0.0%
0.0% 0.0%
5Min Name
0.0% scmd
0.0% [kthreadd]
0.0% [ksoftirqd/0]
0.0% [watchdog/0]
166