Display Irf Configuration - HP FlexFabric 7900 Series Command Reference Manual

Field
Description
Auto upgrade
MAC persistent
Auto merge

display irf configuration

Use display irf configuration to display basic IRF settings on each IRF member device, including the
current member ID, new member ID, and physical ports bound to the IRF ports.
The new member IDs take effect at reboot.
Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# In standalone mode, display the basic IRF settings of the device.
<Sysname> display irf configuration
MemberID Priority IRF-Port1
--
# In IRF mode, display all members' basic IRF settings.
<Sysname> display irf configuration
Description
Description you have configured for the member device.
•
•
Status of the software auto-update function:
•
•
IRF bridge MAC persistence setting:
•
•
State of the auto merge function:
•
•
1 disable
If no description is configured, this field displays a dashed line (-----).
If the description exceeds the maximum number of characters that can
be displayed, an ellipsis (...) is displayed in place of the exceeding
text. To display the complete description, use the display
current-configuration command.
yes—Enabled. The master device automatically pushes its software
images to the device you are adding to the IRF fabric.
no—Disabled. You must manually make sure the joining device uses
the same software images as the master device. If the software images
are different, the new device cannot join the IRF fabric.
always—Bridge MAC address of the IRF fabric does not change after
the master leaves.
no—Bridge MAC address of the new master replaces the original one
as soon as the old master leaves.
yes—Enabled. The IRF fabric automatically reboots its member devices
when it fails in the master election during an IRF fabric merge.
no—Disabled. Manual reboot is required to complete an IRF fabric
merge.
IRF-Port2
disable
3