Starting Radius Accounting - Cisco Catalyst 2960-X Security Configuration Manual

Starting RADIUS Accounting

Related Topics
AAA Authorization, on page 71
Starting RADIUS Accounting
Follow these steps to start RADIUS accounting:
SUMMARY STEPS
1. enable
2. configure terminal
3. aaa accounting network start-stop radius
4. aaa accounting exec start-stop radius
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 aaa accounting network start-stop radius
Example:
Switch(config)# aaa accounting network start-stop
radius
Step 4 aaa accounting exec start-stop radius
Example:
Switch(config)# aaa accounting exec start-stop
radius
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
92
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters the global configuration mode.
Enables RADIUS accounting for all network-related
service requests.
Enables RADIUS accounting to send a start-record
accounting notice at the beginning of a privileged EXEC
process and a stop-record at the end.
Configuring RADIUS
OL-29048-01