Suction Fan - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.7.2 SUCTION FAN

When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
1. Remove the screw that secures the Fan Cover.
A) Silver M3x8 S-tite screw with built-in washer: 1 pcs
2. Slide the Fan Covers in the direction of the arrows to engage the two each hooks,
and remove the two Fan Covers.
Bottom side
Hooks
A
Figure 3-147. Removing the Fan Cover
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
Fan Cover
Hooks
A
Disassembly and Assembly Procedure
3. Disconnect the cable from the Relay Connector.
4. Remove the two sewers, and remove the SUCTION FAN.
B) Silver M3x40 screw: 2 pcs
Bottom side
B
Relay Connector
Figure 3-148. Removing the SUCTION FAN
Revision B
SUCTION FAN
SUCTION FAN
B
184
Confidential