Debug Ospf - Dell N1100-ON Reference Manual

Syntax
debug mldsnooping packet [receive | transmit]
no debug mldsnooping packet [receive | transmit]
Default Configuration
Display of MLD Snooping traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug mldsnooping

debug ospf

Use the debug ospf command to enable tracing of OSPF packets received and
transmitted by the switch. Use the no form of this command to disable
tracing of OSPF packets.
Use of the optional VRF parameter executes the command within the
context of the VRF specific routing table.
Syntax
debug ospf packet [vrf vrf-name]
no debug ospf packet
• vrf-name—The name of the VRF associated with the routing table
context used by the command. If no vrf is specified, the global routing
table context is used.
Default Configuration
Display of OSPF traces is disabled by default.
Switch Management Commands
2052