Table of Contents
Advertisement
Syntax
show ipv6 dhcp interface out-of-band statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
This command is only supported on platforms equipped with an out-of-band
port.
Example
console#show ipv6 dhcp interface out-of-band statistics
DHCPv6 Client Statistics
-------------------------
DHCPv6 Advertisement Packets Received.......... 0
DHCPv6 Reply Packets Received.................. 0
Received DHCPv6 Advertisement Packets Discard.. 0
Received DHCPv6 Reply Packets Discarded........ 0
DHCPv6 Malformed Packets Received.............. 0
Total DHCPv6 Packets Received.................. 0
DHCPv6 Solicit Packets Transmitted............. 8
DHCPv6 Request Packets Transmitted............. 0
DHCPv6 Renew Packets Transmitted............... 0
DHCPv6 Rebind Packets Transmitted.............. 0
DHCPv6 Release Packets Transmitted............. 0
Total DHCPv6 Packets Transmitted............... 8
show ipv6 interface out-of-band
Use the show ipv6 interface out-of-band command to show the IPv6 out-of-
band port configuration.
Syntax
show ipv6 interface out-of-band
1970
Switch Management Commands
Advertisement
Table of Contents
