Table of Contents
Advertisement
Syntax
server server-name
no server server-name
server-name — The name of the server. The server name has a maximum
length of 20 characters. Any printable character other than a question mark
may be used in the server name. Enclose the server name in quotes if an
embedded blank is desired in the server name.
Default Configuration
The default server HiveManagerNG is configured.
Command Mode
HiveAgent Configuration
User Guidelines
The server-name is used as a reference only and is not required to be used as
part of a URL definition. The server name can consist of any alphanumeric
character plus dashes or underscores.
Use the exit command to exit HiveAgent Server configuration mode.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config)# hiveagent
console(conf-hiveagent)#server HiveManagerNG
console(conf-hiveagent-HiveManagerNG)#
enable
Use the enable command to enable a HiveAgent server. Use the no form of
the command to disable a HiveAgent server.
Syntax
enable
1941
Switch Management Commands
Advertisement
Table of Contents
