Hiveagent Commands - Dell N1100-ON Reference Manual

HiveAgent Commands

The commands in this section enable configuration of the Dell HiveAgent.
Commands in this Section
This section explains the following commands:
eula-consent
hiveagent
server
enable
eula-consent
Use the eula-consent command to accept or decline the end-user license
agreement (EULA) for the hive agent. If accepted, the latest version of the
HiveAgent starts. If declined, all Hive Agent applications are stopped.
Syntax
eula-consent {hiveagent} {accept | reject}
• hiveagent—Enter the keyword hiveagent to either accept or reject the
EULA for the HiveAgent.
• accept — Accepts the EULA for the specified service.
reject — Rejects the EULA for the specified service.
•
Default Configuration
The default is eula-consent hiveagent accept.
Command Mode
Global Configuration
proxy-ip-address
url
show hiveagent status
show eula-consent hiveagent
Switch Management Commands
1938