Analyzer Status; Data Review - Abbott i-STAT 1 System Manual

Analyzer Status

The Analyzer Status screen contains information about the condition or "status" of
the analyzer. Fresh readings are made whenever this option is selected.
Temp
Pressure
Battery
Uses
Serial
CLEW
Version
Custom
Stored Records

Data Review

The Data Review function allows the operator to review stored results by the
categories listed below. The number of test records stored is indicated at the
bottom center of the screen as x/y where x is the record on the screen and y is
the total number of stored records in the selected category. The 1 and 2 keys are
used to scroll through the stored records as indicated on the bottom right and left
of the screen. The most recent test record is always in the first position. The right
arrow key is used to page through the screens of the displayed record.
1 - Patient
2 - Control
3 - Proficiency
4 - Cal Ver
5 - Simulator
6 - All
Art: 714364-01O
Room temperature.
Barometric pressure.
Battery voltage.
Total number of cartridge
and simulator test cycles,
whether or not results
reported.
Serial number of the
analyzer.
Version of standardization
data installed in the analyzer.
Version of application
software installed in the
analyzer.
Customization profile name.
Total: The number of test records in the analyzer's
memory. The maximum storage capacity is 1,000
test records, which include records with results and
Quality Check Codes for patients and controls both
liquid and electronic.
Unsent: The number of test records that have not
been transmitted to the Central Data Station.
The records for a patient
are recalled by scanning or
entering via the keypad the
Patient ID. If no Patient ID is
entered, all patient tests are
recalled.
All external and internal Electronic Simulator records.
All test records in the analyzer's memory.
Rev. Date: 26-Feb-16
2-11