6. In the General tab, record all Internet Protocol (TCP/IP) Properties for later use.
7. Select the "Use the following IP Address" radio button and input the following information:
•
IP Address: 192.168.1.8
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.1.1
8. Windows 7: Unplug network cable from the wall and plug it into the back of the DRC-300 and
apply power.
Windows XP: Click OK and close all Control Panel windows. Apply power to the DRC.
9. Using Internet Explorer or another browser, navigate to http://192.168.1.10. The Abbott Point of
Care Inc. i-STAT login screen should appear.
Note 9.1: Internet connectivity is not required. Do not plug the computer into the facility's net-
work.
Note 9.2: If the webpage doesn't appear, check the following:
•
Check to make sure the network cable is connected
•
Check to make sure that power has been applied to the DRC.
•
Check the proxy settings to make certain they are disabled.
1. In Internet Explorer (version 6, 7 and 8) navigate to Tools → Internet Options →
Connections tab → LAN Settings.
2. Under Proxy server, deselect the Use a proxy server for your LAN check box, if
selected.
•
Reset the DRC
Rev. Date: 14-Mar-14
Art: 728690-01F
9