Abbott i-STAT 1 System Manual page 120

Customizing Liquid QC Schedules on the i-STAT 1 Handheld Using CDS Version 5
1. Click on Main → Open Administration Function → Customization
2. Type in your password and click OK. The default password is the word istat.
Note: Abbott Point of Care Inc. recommends changing the default password.
3. Make sure the "Enable Customization" box has a check mark in it.
Also, make certain that the Enable Updates box is checked for the particular location to which
the i-STAT 1 handheld is assigned.
4. If the location where this handheld is assigned has a check mark under Use Default Profile,
under the Default customization profile: column, double click the alphanumeric code under
Preferences. Otherwise, double click the alphanumeric code under the Preferences column for
the specific location to which this handheld is assigned.
4
Art: 730077-01C Rev. Date: 21-Mar-14