Abbott i-STAT 1 System Manual page 547

3. If the location to which this handheld is assigned has a check mark under
Uses Default, under the Default customization profile column, double
click the alphanumeric code under Preferences. Otherwise, double click the
alphanumeric code under the Preferences column for the specific location to
which this handheld is assigned.
4. Once the Preferences window opens, click on the Analyte Enable tab.
5. In the Apply by Panel section of the screen, select BhCG in the Panel
column. The default setting has qualitative hCG enabled. To disable the
qualitative hCG result, click the box beside the hCG analyte in the Enable
column to clear the check mark. OR, to enable the qualitative hCG result,
check the box beside the hCG analyte in the Enable column.
6. Click OK and answer OK to the question about changing the Preferences.
Rev. Date: 14-Mar-16 Art: 730475-01F
11