Abbott i-STAT 1 System Manual page 312

2. While holding down the x key on the PC keyboard, apply power to the
3. Press the Enter key immediately to enter the Setup Mode:
Configure Server
Each network Downloader requires a static IP Address, a Gateway Address, and,
Parameters
if required, a Subnet Mask.
Note:
The following describes how to configure the network Downloader's server
parameters.
21-2
Downloader. When the following screen is displayed release the x key:
Failure to assign a static IP address to the downloader could result
in an i-STAT 1 Analyzer being programmed with an inappropriate
customization profile.
Art: 714383-01F Rev. Date: 02-Sep-08