Abbott i-STAT 1 System Manual page 256

Verifying Software Update
2.9
Run the Electronic Simulator in the newly
updated Handheld.
When the simulator finishes, PASS will be displayed.
Congratulations. The process for updating an
additional i-STAT 1 Handheld is complete.
If there are other i-STAT 1 Handhelds to update,
repeat steps
If there are no other Handhelds to update, the process
is complete.
Art: 731335-01B Rev. Date 13-AUG-13
through
2.2 2.9
Handheld-to-Handheld
If PASS is not displayed,
re-run the Electronic Simulator.
If the repeated Electronic
Simulator attempt fails, please
contact your Support Services
representative.
For additional information on
running the electronic simulator,
please see:
• Section 14 of the i-STAT 1
System Manual, or
• The Introduction and Start-up
section of the i-STAT System
Manual for Waived Tests
14