Abbott i-STAT 1 System Manual page 545

4. If the location to which this handheld is assigned has a check mark under the
Use Default Profile column, double click on the alphanumeric code under
Preferences in the Default Customization Profile column. Otherwise,
double click on the alphanumeric code under Preferences for the specific
location to which this handheld is assigned.
5. Once the Preferences screen opens, click on the "Analyte Enable" tab.
6. In the Apply by Panel section of the screen, select BhCG in the Panel
column. The default setting has qualitative hCG enabled. To disable the
qualitative hCG result, click the box beside the hCG analyte in the Enable
column to clear the check mark. OR, to enable the qualitative hCG result,
check the box beside the hCG analyte in the Enable column.
Rev. Date: 14-Mar-16 Art: 730475-01F
9