Abbott i-STAT 1 System Manual page 98

ANALYZER CUSTOMIZATION OPTIONS AND DEFAULT SETTINGS
Option
LANGUAGE WINDOW Language for text: English, Japanese, German, Italian, Dutch,
Spanish, French, Swedish, Portuguese, Danish, and Finnish
UNIT SET WINDOW Reporting units for results. Selected from predefined sets or by
analyte.
i-STAT 1 ANALYZER AND Standardization data. All non-expired versions listed.
PHILIPS BAM CLEW
WINDOWS
i-STAT 1 SOFTWARE JAMS functionality data.
WINDOW
PREFERENCES WINDOW Options and default settings are listed under six headings:
Instrument, ID Entry, Test, Cartridge QC, Results, and Analyte
Enable.
STATNotes Feature allows users to customize the Chart Page on their i-STAT
1 Analyzers in order to capture user-defined information such as
ventilator settings.
USE eVAS This Feature can automatically determine if the results of a liquid QC
test run on an i-STAT cartridge are within APOC's published quality
control ranges.
USE OPERATOR LIST 4000 operator IDs can be stored in the analyzer along with
certification start and end dates for cartridge testing.
Description Default
English
Unit Set 00 See table below with 17 predefined unit sets. Unit Set
99 allows the name and units for each test to be defined
individually.
Note: Reference Ranges, Action Ranges, and Custom
Reportable Ranges (if applicable) in the Preferences Window
must be changed when changing units.
The CLEW software has an expiration date. If an expired
CLEW remains in a customization profile, a warning will
be displayed.
Users can remotely request a JAMS update for an i-STAT
1 Analyzer from the CDS. See the "Network Options for
Updating the i-STAT 1 Handheld" Technical Bulletin in the
"Care and Software Update" tabbed section of the i-STAT 1
System Manual for full details..
CHART0 See the "i-STAT 1 Analyzer Chart Page Customization"
Technical Bulletin for full details.
Not enabled See the "Liquid Quality Control Pass/Fail Customization on
the i-STAT 1 Handheld" Technical Bulletin for full details.
Not enabled (no Operator lists are created in the Operator Workspace on the
information stored) Central Data Station. This check box cannot be enabled if
the Operator List is empty in the Operator Workspace for all
Departments (other than the one labeled "Unassigned").
Comments