Abbott i-STAT 1 System Manual page 73

Hide thumbs Also See for i-STAT 1:

Table of Contents

CONNECTING AND WIRING THE i-STAT 1 DRC FOR SERIAL COMMUNICATION

Note: For successful data transmission to occur, the USB cable should first be connected between the

DRC and the PC prior to installing or opening the CDS or Jammlite applications.

The following diagram shows how to connect the DRC to the Data Manager via USB connection, and

how to connect the portable printer to the DRC for communication. The required parts are:

Printer Interface Cable

Downloader Recharger Power Supply

Y-Splitter Cable (Optional)

USB DRIVER UNINSTALLATION

1. USB Driver Uninstallation for Windows XP

Caution: Disconnect the DRC-300 from the PC before proceeding.

1.1 Using Internet Explorer, navigate to:

http://www.abbottpointofcare.com/Customer-Support.aspx

1.2 The following link is listed under the "Useful Customer Information " section:

• USB Driver Uninstaller for DRC-300 Downloader/Recharger.

This link allows you to download a utility file (CDMuninstallerGUI.exe)

which can be used to uninstall FTDI USB drivers from a PC.

Rev. Date: 14-Mar-14

RJ12 (printer interface)

If using a Martel Printer, use the power

supply that came with the Martel Printer and

not the Y-Splitter cable provided with the DRC.

Art: 728690-01F

Y-Splitter Cable

Troubleshooting