Abbott i-STAT 1 System Manual page 252

After updating the first i-STAT 1 Handheld, follow these steps to update additional
Handhelds with the Handheld-to-Handheld Process
Gathering All Equipment
2.1
Before starting the process make sure all the
required equipment is available:
• Recently updated i-STAT 1 Handheld (referred to in this section
as the Sending Handheld) charged to 7.5 volts or higher*
• The Handheld unit to be updated (referred to in this section
as the Receiving Handheld) charged to 7.5 volts or higher*
• Electronic Simulator
* For information on checking battery power, see page 4, step
Art: 731335-01B Rev. Date 13-AUG-13
2.
1.2
Handheld-to-Handheld
10