Abbott i-STAT 1 System Manual page 342

22-22
Delete Instrument

Click the Location/Method for the instrument to be deleted and then the serial
number of the instrument to be deleted. Click Instrument  Delete... from the
menu or click Delete Inst. in the toolbar.
Move Instrument

Click the Location/Method for the instrument to be moved and then on the serial
number of the instrument to be moved. Click Instrument  Move... from the
menu or click Move Inst. in the toolbar. Select the new location from the drop
down list or type in a new location.
Find Instrument

Click Instrument  Find... from the menu or click Find... in the toolbar. Enter
the serial number of the instrument and select the Method from the drop down
list.
Edit Instrument Comment

Click the instrument serial number, click Instrument  Edit Comment from the
menu or click Edit Inst. in the toolbar. Enter a comment of up to 16 characters.
Change Current Instrument Setttings

Reporting: Click the instrument serial number. Click Instrument  Current
Instrument  Change Reporting from the menu or click the down arrow next
to Current Inst. and then Reporting in the toolbar to toggle between Download
and Assignment.
In Use: Click the instrument serial number. Click Instrument  Current
Instrument  Toggle In Use from the menu or click the down arrow next to
Current Inst. and then In Use in the toolbar to check (in use) or un-check (out of
use) the analyzer in the In Use column.
Instruments that are not checked "In Use" do not have a download criteria
applied to them. You would use this for instruments you do not expect to be
downloaded. When an analyzer that is not marked "in use" downloads, it is set
back in use and the download criteria is applied.
Monitoring: Click the instrument serial number. Click Instrument  Current
Instrument  Change Monitoring from the menu or click the down arrow next
to Current Inst. and then Monitoring in the toolbar to check or un-check the
analyzer in the Monitoring column.
Add Instrument Note

Click Instrument  Add Note... from the menu or click Add Note in the toolbar.
A note of up to 50 characters can be entered. The note will appear as a Log
Entry in the Instrument Log tab page.
Change Download Monitoring Criteria

Compliance to download policy can be monitored by the CDS program. Click
on the Location/Method. Click on Instrument  Download Criteria... from the
menu or click Criteria in the toolbar. Enter the required download interval. An
interval of up to 1000 hours is allowed.
Compliance with the criteria can be observed by checking the Highlight
Download Status check box or by going to the Download Monitor. Individual
Download criteria can be set for each location and method pair.
Art: 714384-01F Rev. Date: 16-Apr-15