Abbott i-STAT 1 System Manual page 374

Changing a
Password
SYSTEM LOGOFFS
Overview
Manual Logoff
Automatic Logoff
22-54
a. Click and highlight this particular user's listing in the User Window.
b. Click on User  Emergency Password. A box will appear with
an Emergency Password that this particular user can use. Note:
Once this user uses the Emergency Password to log in, they will be
immediately prompted to change their password for future CDS log-
ins. They cannot continue to use the Emergency Password for log-in
purposes.
2. If the Administrator is not available, the user can contact their local
Support Representative for an emergency User Name and/or password.
As with option 1 above, once this user uses the Emergency Password
to log in, they will be immediately prompted to change their password
for future CDS log-ins. They cannot continue to use the Emergency
Password for log-in purposes.
If a user is logged on to the CDS application, they can choose to change their
password at any time by clicking on Tools  Change Password. A dialog
box will appear asking them to enter their Old Password, as well as their New
Password (twice). After entering this information, the user clicks on OK and
answers Yes to the question that appears asking if they really want to change
password.
The CDS provides the capability for manual and automatic user logoffs.
In the logged off state, the majority of CDS screens and functions are not
available. However, analyzer and BAM data can continue to be transmitted to
the application, and subsequently sent to the LIS/HIS (if applicable). Also, the
monitors remain open if they were open prior to logoff.
Once a user has completed their CDS tasks, they can log off by clicking on
System  Log Off. A box will then appear on the screen indicating that the
current user has logged off.
Automatic logoffs are optional and can be enabled in the i-STAT CDS
Customization screen, as described in the Security section above on page
22-13.
Art: 714384-01F Rev. Date: 16-Apr-15