Abbott i-STAT 1 System Manual page 318

Connecting the Serial
Option 1: The following option is for downloading/uploading only and
Port Downloader
21-8
can be used when there is no power outlet available for the
Downloader or Downloader/Recharger.
In this particular configuration, both recharging LED lights will be
lit. The primary recharging LED will blink red and the alternate
will be steady green. This is typical behavior, and does not indicate
that any charging is taking place. In fact, batteries cannot be
charged in the Downloader/Recharger in this configuration.
The following diagram shows how to connect a serial downloader
locally to the Data Manager. Parts required are:
• PC/Downloader Adapter
• DB9-DB9 Null Modem Cable
 Power In
 Power Out
 RJ12 (printer interface)
 DB9
Art: 714383-01F Rev. Date: 02-Sep-08