Abbott i-STAT 1 System Manual page 253

Connecting/Setting Up Equipment
2.2
Make sure the power is off on the Receiving Handheld.
2.3
Place Sending and Receiving Handhelds on a
flat surface with infrared (IR) windows aligned,
approximately 1 foot apart.
Sending Handheld
2.4
Turn on the Sending Handheld, press MENU,
and select 7-Utility.
2.5
When prompted for a password, press ENT
and continue.
If that did not work, a password is needed.
Enter the password defined by your facility and press ENT.
Art: 731335-01B Rev. Date 13-AUG-13
1 1 ' ' 1 1 ' '
Note Abbott Point of Care Inc.
recommends changing
the default password.
Handheld-to-Handheld
Receiving Handheld
If the correct password was not
entered, the Utility Menu will not
appear. Check for data entry
errors and retry.
If still unsuccessful, call your
Support Services representative
and indicate:
• A Handheld-to-Handheld
update has been attempted
• Password for Utility Menu
is unknown
11