Abbott i-STAT 1 System Manual page 100

PREFERENCE WINDOW:
for
Option
OPERATOR ID Minimum and maximum allowed operator ID length (scanned
or manually entered)
REPEAT ID ENTRY Operator must enter ID twice. Handheld prompts operator to
start again if IDs do not match.
INCLUDE ID ON Enables/Disables printing of operator IDs on printouts from
PRINTOUT the Martel or i-STAT printer.
BARCODE OPTIONS The type of barcodes used for Operator ID. See table below.
MANUAL ENTRY CHECK Options are None, ISBN Modulus 11 Check, and IBM
DIGIT Modulus 10 Check.
INVALID OPERATOR Behavior of handheld when Operator ID not in stored list or
certification date expired Options are: Not enabled (continue
without warning), Warn User (prompt to continue), and
Lockout (block testing until a valid Operator ID is scanned/
entered).
EXPIRATION Allows a System Administrator to define a time period (1-255
NOTIFICATION days) in which the operator will be notified by a message on
the i-STAT 1 handheld display of their competency expiration
date.
PATIENT ID Minimum and maximum allowed patient ID length (scanned
or manually entered)
REPEAT ID ENTRY Operator must enter patient ID twice. Analyzer prompts
operator to start again if IDs do not match.
PATIENT ID RECALL Operator can recall last patient ID when analyzer prompts for
Patient ID.
BARCODE OPTIONS The type of barcodes used for Patient ID. See table below.
MANUAL ENTRY CHECK Options are None, ISBN Modulus 11 Check, and IBM
DIGIT Modulus 10 Check.
o p Id o
perator and atIent ptIons
Description Default
Min = 0 Max = 15 If operator IDs are a fixed length, the min. and max. settings
should both be equal to the ID length.
Enabled: repeat required This option can be set for manual and/or scanned ID Entry.
Enabled Disabling the printing of operator IDs can prevent uncertified
operators from learning the IDs of certified operators.
All barcode types
None Check digit algorithms are given in HL7 Specification, Section
2.9.5.3
Continue without This option should not be enabled if the Use Operator List
warning option is disabled.
Separate Actions can be chosen for Certification Expired or
Operator Not On List.
Off See the Technoical Bulletin "Operator Competency Notification
on the i-STAT 1 Handheld" for full details.
Min = 0 Max = 15 If ID numbers are a fixed length, the min. and max. settings
should both be equal to the ID length.
Repeat ID enabled This option can be set for manual and/or scanned ID entry.
The most recent patient ID is recalled by pressing the → key.
Enabled
All barcode types
None Check digit algorithms are given in HL7 Specification, Section
2.9.5.3
Comments