Abbott i-STAT 1 System Manual page 264

1. UPDATE PROCEDURE USING A NETWORK DOWNLOADER AND THE JammLite
PROCESS WITH TCP/IP
1.1:
Before starting the process, make sure all the required equipment / information is
available.
• Computer with:
o Windows 2000, XP, or Windows 7
o Access to http://abbottpointofcare.com/softwareupdate
• i-STAT System Equipment
(1) Network Downloader, Downloader / Recharger, or DRC-300
Note: These instructions assume that the Network Downloader types used for
the update process are already installed and in use on the customer's network.
(2) i-STAT 1 handheld
(3) Electronic Simulator
• List of the IP Address(es) for the network downloader(s) to be used for the soft-
ware update process
1.2:
Close all open programs on the computer including i-STAT Central Data Station
(if applicable).
1.3:
Navigate to www.abbottpointofcare.com/SoftwareUpdate.
1.4:
Select Language from the drop-down menu.
1.5:
If prompted, indicate the type of Data Management (if any) used with the i-STAT System.
Otherwise, proceed to Step 1.9.
1.6:
When prompted, click on the software file link and save file to:
• Desktop, or
• If you use CDS Version 5, save the file in the c:\bins directory. If the c:\bins directory
does not exist, a bins folder will need to be created under the c: drive.
Close the "Download Complete" window.
1.7:
Navigate to saved file location. Double click the software file "SUXXXXXX.exe".
1.8:
Click Run. If a Command window opens prompting to overwrite, answer "Y" and then
press Enter. Continue answering "Y" to all prompts that appear until the Command window
closes. From among the icons that appear, double click
• If the JammLite program does not launch or you receive an error message, contact
APOC Technical Support and tell the support specialist you are unable to complete step
1.8 of this document.
2
Art: 731336-01B
.
Rev. Date: 13-Aug-13