Plc Machine Data - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

Call Conditions
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
6.5

PLC machine data

Note
The following tables list the PLC machine data used in the default PLC applications. The machine data not listed below is
reserved for the manufacturer.
USER_DATA_INT
MD14510 PLC interface
address
Machine data -
Integer
14510[12] DB4500.DBW24
14510[13] DB4500.DBW26
14510[15] DB4500.DBW30
14510[16] DB4500.DBW32
14510[17] DB4500.DBW34
14510[18] DB4500.DBW36
14510[20] DB4500.DBW40
14510[21] DB4500.DBW42
14510[22] DB4500.DBW44
14510[24] DB4500.DBW48
14510[25] DB4500.DBW50
USER_DATA_HEX
MD14512 PLC interface ad-
dress
Machine data -
Hex
14512[16] Bit 1 DB4500.DBX1016.1 Function of chip conveyor (milling)
Bit 2 DB4500.DBX1016.2 Function of safety door (milling)
Bit 3 DB4500.DBX1016.3 When the function of safety door is active, it can be triggered by M01/M02 (mill-
Bit 7 DB4500.DBX1016.7 Handwheel assignment with the MCP/HMI
14512[17] Bit 0 DB4500.DBX1017.0 Turret (turning); tool magazine (milling)
Bit 1 DB4500.DBX1017.1 Clamping function (turning)
Bit 2 DB4500.DBX1017.2 Tail stock function (turning)
Bit 3 DB4500.DBX1017.3 Selection between handwheel and hand-held unit (0: handwheel; 1: hand-held
160
Subroutine Name
MCP_NCK (SBR37)
HANDWHL (SBR39)
AXIS_CTL (SBR40)
SPINDLE (SBR42)
COOLING (SBR44)
LUBRICAT (SBR45)
Unit Range
- 0 to 1
0.1 s 5 to 200
0.1 s 5 to 30
0.1 s 1 to 30
0.1 s 5 to 30
0.1 s 1 to 30
- 2 to 64
0.1 s 5 to 30
0.1 s 30 to 200
1 min 5 to 300
0.01 s 100 to 2000
Function
ing)
unit)
Transferring MCP and HMI signals to
the NCK interface
Selecting a hand wheel through the
interface signal DB1900.DBB1xxx
Coordinate enabling control, hardware
limit, etc.
Spindle control
Cooling control
Lubrication control
Function
Layout of the traverse keys
Time for spindle braking
Spindle override 50% key holding on time defined
Spindle override 100% key holding on time defined
Feedrate override 0% key holding on time defined
Feedrate override 100% key holding on time defined
Maximum number of tools
Turret clamping time
Monitoring time when searching for tools
Lubrication interval
Lubrication duration
Description
Commissioning Manual
01/2017