Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 159

Signal
I3.2 -
I3.3 -
I3.4 -
I3.5 -
I3.6 -
I3.7 -
I4.0 Handheld unit: axis X selected
I4.1 Handheld unit: axis Y selected
I4.2 Handheld unit: axis Z selected
I4.3 Handheld unit: fourth axis selected
I4.4 Handheld unit: increment X1
I4.5 Handheld unit: increment X10
I4.6 Handheld unit: increment X100
I4.7 Handheld unit: enabled
Q0.0 Working lamp
Q0.1 -
Q0.2 Chip forward
Q0.3 Chip backward
Q0.4 Cooling pump
Q0.5 Lubrication pump
Q0.6 Safety door open
Q0.7 -
Q1.0 Magazine rotating clockwise
Q1.1 Magazine rotating counter-clockwise
Q1.2 Magazine approaching spindle position
Q1.3 Magazine approaching original position
Q1.4 Tool release from the spindle
Q1.5 -
Q1.6 -
Q1.7 Handheld unit valid
Definition of user-defined keys on the MCP
User-defined key 1
User-defined key 2
User-defined key 3
User-defined key 4
User-defined key 5
User-defined key 6
User-defined key 7
User-defined key 8
Structure of the sample application (OB1)
Call Conditions
Each scan (SM0.0)
First scan (SM0.1)
Each scan (SM0.0)
Commissioning Manual
01/2017
Description
Working lamp
Manual cooling
Safety door
Manual clockwise rotation of the tool magazine
Manual reset of the tool magazine
Manual counter-clockwise rotation of the tool magazine
Removing chip forward
Removing chip backward
Subroutine Name
AUX_MCP (SBR20)
PLC_INI (SBR32)
EMG_STOP (SBR33)
Remark
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Description
Auxiliary function
PLC initialization
Emergency Stop control
159