Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 283
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
Transferring the cov.com file and sc.com file
+
Transferring the extended user text file
+
Commissioning Manual
01/2017
5.
Paste the user cycle alarm file with this softkey.
6.
Press this softkey when a message appears prompting you to restart the HMI. The new
data will be active after the HMI restarts successfully.
1.
Select the system data operating area.
2.
Open the USB storage directory through the following softkey operations:
→
3.
Select the cov.com and sc.com files and then press this softkey to copy the files.
Note that you can use the following key to select multiple files:
4.
Press this softkey to open the window of system data.
5.
Find the folder for storing the user cycle files through the following operations, and press
this key to open it:
6.
Press this softkey to replace the following empty files:
7.
Press this softkey when a message appears prompting you to restart the HMI. The new
data will be active after the HMI restarts successfully.
1.
Select the system data operating area.
2.
Open the USB storage directory through the following softkey operations:
→
3.
Locate the extended user text file (for example, almc_eng.txt) and press this softkey to copy
the file.
→
→
283
Advertisement
Table of Contents
